Cat6 ethernet cable with shielded bare copper conductors is, without question, the best bulk ethernet cable for commercial and residential LAN networks. If you buy the Cat6 plenum bare copper cable with shielding, it will last for decades making your network future-proof and high-performance.

Exactly what is it about this 1000ft cable that makes it the best for all kinds of networks? Is it its price, its high-performance capabilities, or its ease of installation? Keep reading to find out the answer.

What is Cat6 Plenum BC

This cable is the 6th category of twisted-pair ethernet cables. It was rolled out as an enhanced version of the Cat5e cable. The conductor wires are twisted tightly as compared to its predecessor which ensures better resistance against EMI.

Cat6 plenum bare copper cable also features a spline in between the conductor pairs. The job of this spline, also known as wire separator, is to keep the conductor pairs separate. This results in better resistance and minimum crosstalk, EMI, and external noise.

Over 100 meters of run length, this cable delivers impeccable performance. Its data transfer rates are 1 GBit/s with a 550 MHz bandwidth capacity. At up to 50 meters of length, the data transfer rate reaches a maximum of 10 GBit/s.                   

Shielded Conductors: Are they worth it?

Shielded conductors of the Cat6 cable 1000ft are considered to be its top notch feature. Because of these shielded conductors, this is one of the best selling ethernet cables out there.

The bare copper conductors of the Cat6 ethernet cables have a braided wire mesh wrapped around them. This braided wire mesh ensures that no EMI or crosstalk interferes with the signal transmission. Ultimately, this shielding makes it possible for the cable to relay clean and strong signals over long distances.

Are they worth it? This question still remains though. The answer depends on your requirements. First, if you need this cable for your network, there is no question of its worth. But if you can get good speed even without it, you do not need the shielding.

Do you Need the Shielded Conductors?

Well, then, how do you decide whether you need the shielded cable or unshielded? The answer is simple. For long distance data transmission, specially in outdoor settings, shielded cable is a must.

For short distance transmission, it depends. If the short distance transmission is through a highly cable dense environment, you need the shielded cable. But if you are running the cable in a less cable dense environment over short lengths, you do not need the shielded Cat6 cable. You can simply make do with its unshielded counterpart.

Plenum Jacket: Pros and Cons

The plenum jacket of the cat6 shielded bare copper cable is particularly important in ensuring the performance of the cable.

The primary reason as to why it is suitable for both indoors and outdoors has very much to do with its jacket.

Moreover, the fact that this is an easy to install cable has also to do with the jacket - in addition to the bare copper conductors.

The plenum jacket of the 1000ft Cat6 cable is thicker than other jackets. This means that the cable can be a bit bulky to handle. And installing it will require some skills. 

Overall, the pros and cons of the plenum jacket of the cable are these:

Bare Copper Conductors: Hype or Legit

The bare copper conductors are definitely not a hype. In fact, 100% copper conductors are far better than copper-clad aluminum conductors.

Moreover, the bare copper conductors of the Cat6 shielded cable ensure that the data transfer is fast and the quality of signals impeccable.

Pure copper conductors also keep the latency at a minimum while delivering data without loss in packets. Hence,  these conductors are definitely worth it and not a hype.

Why Buy Cat6 Plenum Bare Copper?

Why buy the Cat6 Plenum Bare Copper Cable? Well there are several reasons you need to buy this ethernet cable. First, it is a high-performing solution for all of your ethernet needs.

It can transfer data at gigabit speeds with a 550 MHz voluminous bandwidth.

The cable is also safe for indoor and outdoor use. Particularly in indoor open spaces.  This cable is the recommended solution for indoor horizontal runs in HVAC ducts.

Ease of installation is another significant reason why you need to buy the Cat6 Bare Copper cable. It comes in easy pull box packaging as well as in wooden spools. You can use either depending on your preference.

So these are some of the various reasons why buying Cat6 Shielded Cable is the best decision for any LAN network.

Conclusion

Buy bulk Cat6 cables to establish flawless wired LAN networks in indoor as well as in outdoor settings. Among all 1000ft ethernet cables, this is the most recommended one for both residential and commercial networks.